tel: +65 6505 9098

01-RP01-3The necessity to avoid possible troubles in filtration plants working and to increase their efficiency, AUTEL S.r.l. Company in Sassuolo, decided to program and to create sophisticated electronic equipment for a better management of the filtration systems and for a best environmental protection. The AUTEL’s dust detector mod. RP01 allows to measures the presence of dust particles suspended into the exhaust gas.

In this way is assured the continuous monitoring of the duct that has to be controlled. With this dust detector, you can also check the deterioration of filtrating surface, timely signaling their maintenance and identifying exactly where is the trouble.

The principle of operation is not based on the usual optical system (that needs a permanent maintenance), but on tribo electric’s effect.

That effect doesn’t need maintenance utilizing the principle of static energy generation caused by the rubbing of the particles suspended on the steel surface of the dust detector.

RP01 detects the presence of dust particles suspended in the gas, converting that physical phenomenon in electronic signal proportional to the quantity of dust.

The combination of dust detector RP01 with DM2 allows to setup on a keyboard, 3 alarm thresholds, the scale calibration in mg/m3 and the management of the output of signal 4-20mA proportional to the dust noticed.

If the alarm is caused by a breaking hose, it could be located if RP01 is connected to ECOMATIC devices enabled for this purpose.